COMPLETE SINGLE ZONE KIT - Includes Main Control Panel, Remote Reset & Indicator Panel, Alarm Pull Cord Switch, Over Door Indicator & Sounder, Disabled WC Self-Adhesive label, Inactive Sticker (for disabling the RESET button) and M3.5 Socket screws.
REGULATION COMPLIANCE - Assists in achieving compliance with the BS8300 requirement for an emergency assistance alarm, the Care Standards Act, the Disability Discrimination Act (DDA) and the English Tourism Council National Accessibility Scheme.
EASY TO INSTALL - This product has been designed for the simplest installation possible. The four easy to fit components make up this complete kit. Only cable and back boxes are required. A full installation guide with pictorial diagrams is supplied.
LOCAL TECHNICAL SUPPORT - Malaysia technical team to backup you for any service request or warranty claim.
This disabled toilet single zone alarm kit allows a person in distress to raise an alarm and request assistance in the event of an emergency. The system is setup so that the Pull Cord and the Remote Reset & Indicator Panel are located next to the toilet in the disabled WC. The Main Control Panel is located in a staffed area, where it is both visible and audible to the responsible person on duty. When the alarm is activated, the staff member can press the “Call Answered” button to inform the person in distress that assistance is on the way. The LED indicator on the Remote Reset & Indicator Panel will become illuminated and tone/frequency of the alarm will decrease. The alarm can also be reset from the Remote Reset & Indicator Panel . The Over Door Indicator & Sounder can be installed over the door of the disabled WC to draw further attention to the location of the person in distress.
Main Control Panel
Remote Reset & Indicator Panel
Alarm Pull Cord Switch
Over Door Indicator & Sounder
Disabled WC Self-Adhesive label
Inactive Sticker (for disabling the RESET button).
M3.5 Socket screws
Braille marked control buttons
LED indicators and audio sound
Call answer facility and reset button
Volume control on panel
Surface or recessed fixing
Fits standard 30mm patress or metal box
Two wire system
Battery backup 9V NiMH PP3 250mAh
Over discharge protection is built into the main panel